Setting my plan into motion

All BBQ smoked Low-N-Slow OR Hot-N-Fast goes here.

Moderator: TBBQF Deputies

Fooldancing
Rustler
Posts: 120
Joined: Sat Jun 03, 2017 5:15 pm
Contact:

Setting my plan into motion

Postby Fooldancing » Fri Jun 09, 2017 8:37 pm

I have been thinking and trying to picture ideas in my head about what to use for holding my wood chips or chunks for when I start smoking meat on the propane grill. I just acquired an older aluminum bread baking pan.

Sent from my VS990 using Tapatalk
txdragon USER_AVATAR
Txdragon
Deputy
Posts: 5036
Joined: Mon May 14, 2012 3:13 pm
Location: Forney, TX
Contact:

Re: Setting my plan into motion

Postby Txdragon » Sat Jun 10, 2017 6:36 am

You can also get a small cast iron skillet. :idea:
(Insert witty signature here)
Fooldancing
Rustler
Posts: 120
Joined: Sat Jun 03, 2017 5:15 pm
Contact:

Re: Setting my plan into motion

Postby Fooldancing » Sat Jun 10, 2017 7:26 am

That's good to know, thank you.
I was thinking that, but was worried that it would take too much to heat up. I actually have 2 of them.


Sent from my VS990 using Tapatalk
chasdev USER_AVATAR
Chasdev
Outlaw
Posts: 1011
Joined: Tue Oct 27, 2015 10:50 am
Location: Austin, Tx.
Contact:

Re: Setting my plan into motion

Postby Chasdev » Sun Jun 11, 2017 7:25 am

Recently I read an article that stated cooking with aluminum over very high heat may cause brain ailments like alzheimers, including aluminum foil wrapped wood chips sadly...
oldusedparts USER_AVATAR
OldUsedParts
Deputy
Posts: 21611
Joined: Sun May 15, 2011 7:09 pm
Location: Montgomery, Texas
Contact:

Re: Setting my plan into motion

Postby OldUsedParts » Sun Jun 11, 2017 7:49 am

CD, my oldest step-son sent me an article on the dangers of cooking with foil BUT I have a hard time taking anything the Gooberment has its hand it very serious anymore - - - - it's never truly about health, it's always about $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
I am determined to sustain myself as long as possible & die like a soldier who never forgets what is due to his own honor & that of his country—Victory or Death. William Barret Travis - Lt. Col. comdt "The Alamo"
Fooldancing
Rustler
Posts: 120
Joined: Sat Jun 03, 2017 5:15 pm
Contact:

Re: Setting my plan into motion

Postby Fooldancing » Sun Jun 11, 2017 8:13 am

I dont mind using my cast iron. I'll have to see which works the best.

Sent from my VS990 using Tapatalk
okie sawbones USER_AVATAR
Okie Sawbones
Outlaw
Posts: 2049
Joined: Mon Apr 21, 2014 12:14 pm
Location: Edgewood, TX
Contact:

Re: Setting my plan into motion

Postby Okie Sawbones » Sun Jun 11, 2017 8:25 am

KCBS - CBJ
PNWBA - CBJ
Jambo Clone, Primo Oval XL, Blaz'n Grills Pellet Stove, Weber 22.5", Lynx SS Grill, The Big Easy
VFW - Life, DAV - Life

Return to “Smokehouse - BBQ Discussion”

Who is online

Users browsing this forum: No registered users and 37 guests