Ribs on a gasser

Looking for something special but dont see it? Post your request here.

Moderator: TBBQF Deputies

FWL2579
Pilgrim
Posts: 43
Joined: Thu Oct 13, 2016 8:43 am
Location: Baton Rouge
Contact:

Ribs on a gasser

Postby FWL2579 » Thu Nov 10, 2016 8:16 pm

What is the best way to cook pork ribs on a gasser? Just got my new Genesis and want to cook some ribs this weekend. Any help will be appreciated. Thanks
Weber Kettle, Weber Genesis S-330
User avatar
castironchris
Bandolero
Posts: 759
Joined: Thu Aug 11, 2016 9:19 am
Contact:

Re: Ribs on a gasser

Postby castironchris » Fri Nov 11, 2016 6:21 am

I will defer to others with more experience but I did them a couple of times by turning the burners low and putting them on the upper rack and I even propped the lid open to try to keep the temps down but the cheapo gasser I have wouldn't stay below 400 degrees all the way on low with one burner off. I am sure the Weber will do a lot better job than the one I had and probably won't require such nonsense. Good luck!!
Old Smokey 22"
Weber Jumbo Joe
Weber 22" with SlownSear
Weber Smokey Mountain 22"
User avatar
woodenvisions
Chuck Wagon
Posts: 2712
Joined: Sun Aug 02, 2015 12:37 pm
Contact:

Re: Ribs on a gasser

Postby woodenvisions » Fri Nov 11, 2016 6:37 am

Depending upon how much room you have on the grate surface and how low you can keep your indirect heat will vary in your outcome.
Before I went to lump, I've done a few racks on our cheap gas grill I scooped up on Craigslist for 0 bucks :)
Great deal for us since a week before ours went to the scrap yard.

Anyways, we got the one side up to medium temp, and put the ribs on the unlit side in a foiled pan and cooked indirect for about 3 hrs. Took them out and put them back in the same side without the foil for about another hour.
Then the last 30 minutes moved them to the lit side and sauces them.

All I can say is this worked for me, hopefully you have success in the road you choose. It may take some trial and error so don't get frustrated, it CAN be done successfully using gas.

Good luck
FWL2579
Pilgrim
Posts: 43
Joined: Thu Oct 13, 2016 8:43 am
Location: Baton Rouge
Contact:

Re: Ribs on a gasser

Postby FWL2579 » Fri Nov 11, 2016 12:09 pm

Thanks for the tips guys. We will see how it turns out.
Weber Kettle, Weber Genesis S-330
FWL2579
Pilgrim
Posts: 43
Joined: Thu Oct 13, 2016 8:43 am
Location: Baton Rouge
Contact:

Re: Ribs on a gasser

Postby FWL2579 » Tue Nov 15, 2016 3:09 pm

This past weekend
Attachments
IMG_3189.JPG
They turned out pretty good
Weber Kettle, Weber Genesis S-330
User avatar
OldUsedParts
Deputy
Posts: 7913
Joined: Sun May 15, 2011 7:09 pm
Location: Montgomery, Texas
Contact:

Re: Ribs on a gasser

Postby OldUsedParts » Tue Nov 15, 2016 5:04 pm

Finger licking Bonz with great shrink back - - - - winner winner Ribbie Dinner :tup: :salut: :cheers:
OUP

" Country by choice, Texan by the Grace of God "
User avatar
castironchris
Bandolero
Posts: 759
Joined: Thu Aug 11, 2016 9:19 am
Contact:

Re: Ribs on a gasser

Postby castironchris » Wed Nov 16, 2016 8:34 am

Looks like you got it figured out!! Them ribs look good!!
Old Smokey 22"
Weber Jumbo Joe
Weber 22" with SlownSear
Weber Smokey Mountain 22"

Return to “Request a Recipe”

Who is online

Users browsing this forum: No registered users and 1 guest