My first build
Posted: Sat Feb 13, 2016 8:34 pm
So I've been slowly putting together a plan and am slowly making progress.
New unlined drum from Dallas steel drums.
[img]//uploads.tapatalk-cdn.com/20160214/3a35ece87d2fe54459367f1f0dda967b.jpg[/img]
[img]//uploads.tapatalk-cdn.com/20160214/581f2039b621f96a30aca744281e91a7.jpg[/img]
Worked on a no-weld fire basket when I had a few minutes last weekend. Decided to be really smart instead of using hardware to connect the basket to the grate I used the small precut baling ties...they look pretty bad but seem to be holding solid. Then just a piece of rebar strapped to the top as a handle.
[img]//uploads.tapatalk-cdn.com/20160214/5133d100c549932f925ae1a575e1d282.jpg[/img]
Just testing the fit
[img]//uploads.tapatalk-cdn.com/20160214/1ab85d872de7d574eadc5d2e8b4bed4b.jpg[/img]
I also learned the importance of gloves with expanded steel...
[img]//uploads.tapatalk-cdn.com/20160214/3604674dd21a46f530203ccf9a2c9395.jpg[/img]
Today was my burn out of the barrel. I went with the weed-burner method as I'm right in the middle of town and was a little nervous about a rip roaring fire and the neighbors.
[img]//uploads.tapatalk-cdn.com/20160214/a2efb6061366944fcc233b3d55e36bcf.jpg[/img]
My wife was a little concerned about my safety...
[img]//uploads.tapatalk-cdn.com/20160214/34927414da50d1dff089450d55649f8a.jpg[/img]
Interesting view of the rust inhibitor as it burns.
[img]//uploads.tapatalk-cdn.com/20160214/fbeb85820ce91286cc737aee064ff29f.jpg[/img]
[img]//uploads.tapatalk-cdn.com/20160214/60d87fcef87731b2659f3d439a1e07d1.jpg[/img]
[img]//uploads.tapatalk-cdn.com/20160214/d6f4f926c7b795352fb0c8b038001650.jpg[/img]
Giving up for the day, tomorrow will be a good cleaning, drilling, and painting. If all works out it may even be all put together by the end of the night. (Probably won't be done until next weekend)
If anyone is still reading, I really appreciate the help from this site with some stupid newbie questions and the huge amount of knowledge in previous posts. Thanks to everyone. Also if you see anything too stupid that I've done, please let me know!
Sent from my iPhone using Tapatalk
New unlined drum from Dallas steel drums.
[img]//uploads.tapatalk-cdn.com/20160214/3a35ece87d2fe54459367f1f0dda967b.jpg[/img]
[img]//uploads.tapatalk-cdn.com/20160214/581f2039b621f96a30aca744281e91a7.jpg[/img]
Worked on a no-weld fire basket when I had a few minutes last weekend. Decided to be really smart instead of using hardware to connect the basket to the grate I used the small precut baling ties...they look pretty bad but seem to be holding solid. Then just a piece of rebar strapped to the top as a handle.
[img]//uploads.tapatalk-cdn.com/20160214/5133d100c549932f925ae1a575e1d282.jpg[/img]
Just testing the fit
[img]//uploads.tapatalk-cdn.com/20160214/1ab85d872de7d574eadc5d2e8b4bed4b.jpg[/img]
I also learned the importance of gloves with expanded steel...
[img]//uploads.tapatalk-cdn.com/20160214/3604674dd21a46f530203ccf9a2c9395.jpg[/img]
Today was my burn out of the barrel. I went with the weed-burner method as I'm right in the middle of town and was a little nervous about a rip roaring fire and the neighbors.
[img]//uploads.tapatalk-cdn.com/20160214/a2efb6061366944fcc233b3d55e36bcf.jpg[/img]
My wife was a little concerned about my safety...
[img]//uploads.tapatalk-cdn.com/20160214/34927414da50d1dff089450d55649f8a.jpg[/img]
Interesting view of the rust inhibitor as it burns.
[img]//uploads.tapatalk-cdn.com/20160214/fbeb85820ce91286cc737aee064ff29f.jpg[/img]
[img]//uploads.tapatalk-cdn.com/20160214/60d87fcef87731b2659f3d439a1e07d1.jpg[/img]
[img]//uploads.tapatalk-cdn.com/20160214/d6f4f926c7b795352fb0c8b038001650.jpg[/img]
Giving up for the day, tomorrow will be a good cleaning, drilling, and painting. If all works out it may even be all put together by the end of the night. (Probably won't be done until next weekend)
If anyone is still reading, I really appreciate the help from this site with some stupid newbie questions and the huge amount of knowledge in previous posts. Thanks to everyone. Also if you see anything too stupid that I've done, please let me know!
Sent from my iPhone using Tapatalk