My first build
Moderator: TBBQF Deputies
-
- Pilgrim
- Posts: 13
- Joined: Tue Nov 10, 2015 1:59 am
- Contact:
My first build
So I've been slowly putting together a plan and am slowly making progress.
New unlined drum from Dallas steel drums.
[img]//uploads.tapatalk-cdn.com/20160214/3a35ece87d2fe54459367f1f0dda967b.jpg[/img]
[img]//uploads.tapatalk-cdn.com/20160214/581f2039b621f96a30aca744281e91a7.jpg[/img]
Worked on a no-weld fire basket when I had a few minutes last weekend. Decided to be really smart instead of using hardware to connect the basket to the grate I used the small precut baling ties...they look pretty bad but seem to be holding solid. Then just a piece of rebar strapped to the top as a handle.
[img]//uploads.tapatalk-cdn.com/20160214/5133d100c549932f925ae1a575e1d282.jpg[/img]
Just testing the fit
[img]//uploads.tapatalk-cdn.com/20160214/1ab85d872de7d574eadc5d2e8b4bed4b.jpg[/img]
I also learned the importance of gloves with expanded steel...
[img]//uploads.tapatalk-cdn.com/20160214/3604674dd21a46f530203ccf9a2c9395.jpg[/img]
Today was my burn out of the barrel. I went with the weed-burner method as I'm right in the middle of town and was a little nervous about a rip roaring fire and the neighbors.
[img]//uploads.tapatalk-cdn.com/20160214/a2efb6061366944fcc233b3d55e36bcf.jpg[/img]
My wife was a little concerned about my safety...
[img]//uploads.tapatalk-cdn.com/20160214/34927414da50d1dff089450d55649f8a.jpg[/img]
Interesting view of the rust inhibitor as it burns.
[img]//uploads.tapatalk-cdn.com/20160214/fbeb85820ce91286cc737aee064ff29f.jpg[/img]
[img]//uploads.tapatalk-cdn.com/20160214/60d87fcef87731b2659f3d439a1e07d1.jpg[/img]
[img]//uploads.tapatalk-cdn.com/20160214/d6f4f926c7b795352fb0c8b038001650.jpg[/img]
Giving up for the day, tomorrow will be a good cleaning, drilling, and painting. If all works out it may even be all put together by the end of the night. (Probably won't be done until next weekend)
If anyone is still reading, I really appreciate the help from this site with some stupid newbie questions and the huge amount of knowledge in previous posts. Thanks to everyone. Also if you see anything too stupid that I've done, please let me know!
Sent from my iPhone using Tapatalk
New unlined drum from Dallas steel drums.
[img]//uploads.tapatalk-cdn.com/20160214/3a35ece87d2fe54459367f1f0dda967b.jpg[/img]
[img]//uploads.tapatalk-cdn.com/20160214/581f2039b621f96a30aca744281e91a7.jpg[/img]
Worked on a no-weld fire basket when I had a few minutes last weekend. Decided to be really smart instead of using hardware to connect the basket to the grate I used the small precut baling ties...they look pretty bad but seem to be holding solid. Then just a piece of rebar strapped to the top as a handle.
[img]//uploads.tapatalk-cdn.com/20160214/5133d100c549932f925ae1a575e1d282.jpg[/img]
Just testing the fit
[img]//uploads.tapatalk-cdn.com/20160214/1ab85d872de7d574eadc5d2e8b4bed4b.jpg[/img]
I also learned the importance of gloves with expanded steel...
[img]//uploads.tapatalk-cdn.com/20160214/3604674dd21a46f530203ccf9a2c9395.jpg[/img]
Today was my burn out of the barrel. I went with the weed-burner method as I'm right in the middle of town and was a little nervous about a rip roaring fire and the neighbors.
[img]//uploads.tapatalk-cdn.com/20160214/a2efb6061366944fcc233b3d55e36bcf.jpg[/img]
My wife was a little concerned about my safety...
[img]//uploads.tapatalk-cdn.com/20160214/34927414da50d1dff089450d55649f8a.jpg[/img]
Interesting view of the rust inhibitor as it burns.
[img]//uploads.tapatalk-cdn.com/20160214/fbeb85820ce91286cc737aee064ff29f.jpg[/img]
[img]//uploads.tapatalk-cdn.com/20160214/60d87fcef87731b2659f3d439a1e07d1.jpg[/img]
[img]//uploads.tapatalk-cdn.com/20160214/d6f4f926c7b795352fb0c8b038001650.jpg[/img]
Giving up for the day, tomorrow will be a good cleaning, drilling, and painting. If all works out it may even be all put together by the end of the night. (Probably won't be done until next weekend)
If anyone is still reading, I really appreciate the help from this site with some stupid newbie questions and the huge amount of knowledge in previous posts. Thanks to everyone. Also if you see anything too stupid that I've done, please let me know!
Sent from my iPhone using Tapatalk
- Finatic
- Bandolero
- Posts: 581
- Joined: Thu May 07, 2015 2:14 pm
- Location: Elgin, Texas
- Contact:
Re: My first build
Im not seeing any pics.
-
- Pilgrim
- Posts: 13
- Joined: Tue Nov 10, 2015 1:59 am
- Contact:
Re: My first build
Finatic wrote:Im not seeing any pics.
Did they not come through? I can see them on tapatalk.
Sent from my iPhone using Tapatalk
- bsooner75
- High Plains Smoker
- Posts: 8537
- Joined: Mon Jan 16, 2012 5:34 pm
- Location: Little Elm, TX
- Contact:
Re: My first build
I see them on tapatalk as well. In the past I ran into a tapatalk issue where the photos were too large for desktop use. Tapatalk should give you a sizing option. I usually pick medium.
Nice project you've got going there!
Sent from my iPhone using Tapatalk
Twitter handle @bsooner75
Nice project you've got going there!
Sent from my iPhone using Tapatalk
Twitter handle @bsooner75
-
- Pilgrim
- Posts: 13
- Joined: Tue Nov 10, 2015 1:59 am
- Contact:
Re: My first build
bsooner75 wrote:I see them on tapatalk as well. In the past I ran into a tapatalk issue where the photos were too large for desktop use. Tapatalk should give you a sizing option. I usually pick medium.
Nice project you've got going there!
Sent from my iPhone using Tapatalk
Twitter handle @bsooner75
That's probably it, I think I used the large size pics. I'll try uploading them again tonight in a smaller size. Plus I have the first coat of paint on it now!
Sent from my iPhone using Tapatalk
-
- Pilgrim
- Posts: 13
- Joined: Tue Nov 10, 2015 1:59 am
- Contact:
Re: My first build
Sorry for not uploading pics again, been a crazy week, I just got the finishing touches done on my UDS build. Unfortunately the weather is crappy and my wife isn't happy so I won't get my first burn tonight. Hopefully next Sunday after I get back from a hunting trip.
Here it is. Very basic, boring UDS.
Thanks again for all the help with my stupid questions as I was going!
Sent from my iPhone using Tapatalk
Here it is. Very basic, boring UDS.
Thanks again for all the help with my stupid questions as I was going!
Sent from my iPhone using Tapatalk
- bsooner75
- High Plains Smoker
- Posts: 8537
- Joined: Mon Jan 16, 2012 5:34 pm
- Location: Little Elm, TX
- Contact:
Re: My first build
Dude, your UDS is "Back in Black" looking good!
Sent from my iPhone using Tapatalk
Twitter handle @bsooner75
Sent from my iPhone using Tapatalk
Twitter handle @bsooner75
-
- Pilgrim
- Posts: 13
- Joined: Tue Nov 10, 2015 1:59 am
- Contact:
Re: My first build
It's finally going for real!
8lb pork but
Couldn't resist sneaking a peek without opening it up!
Sent from my iPhone using Tapatalk
-
- Pilgrim
- Posts: 13
- Joined: Tue Nov 10, 2015 1:59 am
- Contact:
Re: My first build
Temp is steady between 217 and 220
Planning on removing at 195 then into a cooler to rest. Any advice or anything I'm missing? Was not planning to foil it.
Sent from my iPhone using Tapatalk
-
- Pilgrim
- Posts: 13
- Joined: Tue Nov 10, 2015 1:59 am
- Contact:
Re: My first build
Came out great, and what could go better with it than Big Red?
Sent from my iPhone using Tapatalk
- bsooner75
- High Plains Smoker
- Posts: 8537
- Joined: Mon Jan 16, 2012 5:34 pm
- Location: Little Elm, TX
- Contact:
Re: My first build
Looks good!
Question - what was your cook time and did you have to reload on fuel? Just curious about the UDS.
Sent from my iPhone using Tapatalk
Twitter handle @bsooner75
Question - what was your cook time and did you have to reload on fuel? Just curious about the UDS.
Sent from my iPhone using Tapatalk
Twitter handle @bsooner75
-
- Pilgrim
- Posts: 13
- Joined: Tue Nov 10, 2015 1:59 am
- Contact:
Re: My first build
bsooner75 wrote:Looks good!
Question - what was your cook time and did you have to reload on fuel? Just curious about the UDS.
Sent from my iPhone using Tapatalk
Twitter handle @bsooner75
8lb butt cooked for me in around 13 hours, could've probably even gone longer but I was just trying to stay awake. As for fuel I loaded up my fire basket (almost a full bag of lump mixed with Apple chunks) and still have close to half left.
Sent from my iPhone using Tapatalk
- bsooner75
- High Plains Smoker
- Posts: 8537
- Joined: Mon Jan 16, 2012 5:34 pm
- Location: Little Elm, TX
- Contact:
Re: My first build
Cool, the UDS has had my curiosity up for a while.
Thank you
Sent from my iPhone using Tapatalk
Twitter handle @bsooner75
Thank you
Sent from my iPhone using Tapatalk
Twitter handle @bsooner75
- ChileFarmer
- Forum Star
- Posts: 6602
- Joined: Sun Feb 18, 2007 6:18 pm
- Location: Jacksonville,Texas
- Contact:
Re: My first build
Smoker looks great so does the butt. Nice all around. CF
OK, get over it, you lost. God bless America
http://s235.photobucket.com/albums/ee175/ChileFarmer" target="_blank
Lots of Sub folders to.
http://curingandsmoking.blogspot.com/" target="_blank
http://s235.photobucket.com/albums/ee175/ChileFarmer" target="_blank
Lots of Sub folders to.
http://curingandsmoking.blogspot.com/" target="_blank
-
- Pilgrim
- Posts: 13
- Joined: Tue Nov 10, 2015 1:59 am
- Contact:
Re: My first build
ChileFarmer wrote:Smoker looks great so does the butt. Nice all around. CF
Thanks! The smoker and butt came out so much better than I would've imagined for my first shot at both!
Sent from my iPhone using Tapatalk
Return to “Ugly Drum Smokers (UDS)”
Who is online
Users browsing this forum: No registered users and 3 guests