Even Temps?

UDS Plans, Projects and discussions concerning Ugly Drum Smokers.

Moderator: TBBQF Deputies

heisenberg USER_AVATAR
heisenberg
Pilgrim
Posts: 9
Joined: Wed Aug 03, 2016 8:47 pm
Location: Frisco, TX
Contact:

Even Temps?

Postby heisenberg » Fri Aug 05, 2016 11:59 pm

Evening all,

Any tips on getting an even temp across your cooking grate?

On my UDS (Big Poppa Smoker Kit), the middle of the grate is obviously a lot hotter than the perimeter. I rigged up a round pizza pan (the ones with holes all in it), by covering it with foil for a heat deflector. I set it about half way between by fire basket and cooking grate. Now the perimeter is hotter than the center.

Any suggestions?
Weber Performer
UDS
k.a.m. USER_AVATAR
k.a.m.
Chuck Wagon
Posts: 3741
Joined: Mon Jun 25, 2012 6:38 pm
Contact:

Re: Even Temps?

Postby k.a.m. » Sun Aug 07, 2016 8:48 am

I designed my deflector to even out the temps it works great. It disperses the heat to the sides and also lets heat up through the center.
100_0408.jpg

100_0411.jpg
Always remember slow and steady wins the race.



My Hybrid cooker.
Competition trailer #2.
heisenberg USER_AVATAR
heisenberg
Pilgrim
Posts: 9
Joined: Wed Aug 03, 2016 8:47 pm
Location: Frisco, TX
Contact:

Re: Even Temps?

Postby heisenberg » Sun Aug 07, 2016 2:02 pm

That's a nice deflector k.a.m.

Guess I need to spend some time figuring out a better deflector, that will distribute heat better.
Weber Performer
UDS
swamp donkeyz bbq USER_AVATAR
Swamp Donkeyz BBQ
Outlaw
Posts: 1966
Joined: Tue Oct 16, 2012 2:26 pm
Location: Huntsville, Tx
Contact:

Re: Even Temps?

Postby Swamp Donkeyz BBQ » Mon Aug 08, 2016 8:23 am

That deflector is a thing of beauty Kevin!!
finatic USER_AVATAR
Finatic
Bandolero
Posts: 581
Joined: Thu May 07, 2015 2:14 pm
Location: Elgin, Texas
Contact:

Re: Even Temps?

Postby Finatic » Mon Aug 08, 2016 10:26 am

Nice work k.a.m.! Sure looks like that'll work great.

I've seen this heat difuser from Gateway Drum Smokers and like the looks of it. For $79 plus freight I'd build my own but if you don't have that option this looks to me like it'll work great too.
Attachments
Gateway- Heat Difuser Plate.jpg
Gateway- Heat Difuser Plate.jpg (54.81 KiB) Viewed 4938 times
k.a.m. USER_AVATAR
k.a.m.
Chuck Wagon
Posts: 3741
Joined: Mon Jun 25, 2012 6:38 pm
Contact:

Re: Even Temps?

Postby k.a.m. » Mon Aug 08, 2016 2:01 pm

Thank y'all. :D It works pretty good. :D
Always remember slow and steady wins the race.



My Hybrid cooker.
Competition trailer #2.
heisenberg USER_AVATAR
heisenberg
Pilgrim
Posts: 9
Joined: Wed Aug 03, 2016 8:47 pm
Location: Frisco, TX
Contact:

Re: Even Temps?

Postby heisenberg » Mon Aug 08, 2016 7:20 pm

Fintatic,

I like the general design of that, but where would I even start to look for steel discs like that? I could see doing it myself, starting with less holes and working my way up to the sweet spot. I just don't know where to get the metal.
Weber Performer
UDS
oldusedparts USER_AVATAR
OldUsedParts
Deputy
Posts: 21541
Joined: Sun May 15, 2011 7:09 pm
Location: Montgomery, Texas
Contact:

Re: Even Temps?

Postby OldUsedParts » Mon Aug 08, 2016 7:29 pm

what about a metal frying pan of the right diameter, remove the handle and start drilling :?:
I am determined to sustain myself as long as possible & die like a soldier who never forgets what is due to his own honor & that of his country—Victory or Death. William Barret Travis - Lt. Col. comdt "The Alamo"
heisenberg USER_AVATAR
heisenberg
Pilgrim
Posts: 9
Joined: Wed Aug 03, 2016 8:47 pm
Location: Frisco, TX
Contact:

Re: Even Temps?

Postby heisenberg » Mon Aug 08, 2016 8:50 pm

OldUsedParts wrote:what about a metal frying pan of the right diameter, remove the handle and start drilling :?:


Sounds like a good place to start.
Weber Performer
UDS
kramergwt USER_AVATAR
Kramergwt
Pilgrim
Posts: 22
Joined: Sun Jul 03, 2016 10:30 am
Location: Bee Cave, Tx
Contact:

Re: Even Temps?

Postby Kramergwt » Mon Aug 08, 2016 11:01 pm

You can get a piece of 1/16" sheet metal and make one pretty cheap. I made one for my offset smoker. The key is placing the smaller holes where the highest concentration of heat is and gradually make them larger moving away from the concentration of heat. An offset smoker (I think) is more severe because you are moving heat horizontally when it naturally wants to rise. Mine traps all the heat and moves it away from the fire box. If you think it through, it isn't that hard. I made mine in a few hours. All you need is an angle grinder, 3 or 4 small kerf blades for cutting metal, and a step drill bit (which will come in handy later in life). My left and right side fluctuate between 5 and 10 degrees difference. If I put a water pan over the holes on the firebox side, the temps are the same.
Attachments
20160702_201822.jpg
finatic USER_AVATAR
Finatic
Bandolero
Posts: 581
Joined: Thu May 07, 2015 2:14 pm
Location: Elgin, Texas
Contact:

Re: Even Temps?

Postby Finatic » Tue Aug 09, 2016 7:53 am

heisenberg wrote:Fintatic,

I like the general design of that, but where would I even start to look for steel discs like that? I could see doing it myself, starting with less holes and working my way up to the sweet spot. I just don't know where to get the metal.

You can buy mild sheet steel from your local steel supplier. I use Metals 4 U. Sometimes they'll have a scrap pile and you can find what you need there pretty cheap. If not they'll likely sell you half a sheet. I'd recommend 1/8" (11 gauge) wall thickness. 14 gauge will work too but you'll get a lot more life out of the 11 gauge.
red farr USER_AVATAR
Red Farr
Wrangler
Posts: 69
Joined: Sat Mar 23, 2013 8:08 pm
Contact:

Re: Even Temps?

Postby Red Farr » Tue Aug 09, 2016 8:17 am

Lowes and Home Depot both have sheet metal
Walmart has a 15.5 inch pizza pan one solid another perforated

Red
...Blue Skies and Green Lights...
big ed USER_AVATAR
Big Ed
Outlaw
Posts: 2385
Joined: Sat May 02, 2009 9:35 pm
Location: Ft. Worth, Texas
Contact:

Re: Even Temps?

Postby Big Ed » Sun Aug 21, 2016 12:24 pm

I use a big alum. turkey pan filled with water, works great on brisket and ribs. Get em at the dollar store and chunk it after the cook!!
Can't Beat A Drum!!!

Big Ed BBQ
https://www.facebook.com/BigEdBbq
Custom elf Pit (UDS on Steriods)
Water Tower pit
PK Grill
22'' weber kettle

Return to “Ugly Drum Smokers (UDS)”

Who is online

Users browsing this forum: No registered users and 8 guests