Donny & Lads UDS build
Posted: Sun Nov 03, 2019 7:49 pm
What’s happening fellas. Started this build a couple weeks ago from an old feed barrel. Took some pics along the way. The wood coal “feeder” / “maintenance” box is fully shielded with high temp barrier on the inside. Same will be done to inner face of the box’s door. Plan on utilizing this feeder box to try to cook/smoke pizzas as well. Looking forward to that.
Coal basket is galvanized pail. Used grinder to get some air inlets. Grinder was far more rapid than drilling holes. Created pinned standoff’s with long bolts and an old galvanized garbage lid as ash catcher under coal basket. Perfect fit inside barrel. If coal basket proves to be too small I will increase size for larger. Wood like to try small first. Although I anticipate I might need more holes/Slices for additional airflow. We’ll see.
Lid and door are being stained and varnished on outside only. Have press for concept and 2/3 split on door for batter access without removing whole door. Also avoided need for drilling an external drum hinge for entire lid. Will have more pics to share as I progress further. Appreciate any insight, thanks.
Coal basket is galvanized pail. Used grinder to get some air inlets. Grinder was far more rapid than drilling holes. Created pinned standoff’s with long bolts and an old galvanized garbage lid as ash catcher under coal basket. Perfect fit inside barrel. If coal basket proves to be too small I will increase size for larger. Wood like to try small first. Although I anticipate I might need more holes/Slices for additional airflow. We’ll see.
Lid and door are being stained and varnished on outside only. Have press for concept and 2/3 split on door for batter access without removing whole door. Also avoided need for drilling an external drum hinge for entire lid. Will have more pics to share as I progress further. Appreciate any insight, thanks.