BBQ Guru Meat + Pit Probe Upgrades, Homemade, Custom!

Moderator: TBBQF Deputies

bbqguruprobe
Pilgrim
Posts: 2
Joined: Mon Aug 29, 2016 10:51 am
Contact:

BBQ Guru Meat + Pit Probe Upgrades, Homemade, Custom!

Postby bbqguruprobe » Wed Sep 07, 2016 10:39 am

Hey all,

Just wanted to let you know I'm selling low cost HOMEMADE replacement meat / pit probes for the BBQ Guru controllers / smokers.
I got tired of paying nearly $25 for replacement parts and didn't like the way they were built, so I bought some materials and started making my own.
Everyone that used them at my local shows liked them and suggested I make some extra to sell and spread the good fortune... so here is the information:

http://www.ebay.com/itm/291859370330 [short tube pit and meat probe]
http://www.ebay.com/itm/291867403814 [longer tube meat and pit probe]

I'm also working on a version that has a bent tube for easier insertion, or some sort of handle.... it's hard to source good materials though....

They utilize an easy to clean FEP jacketed cable instead of that woven steel.
The are pointed so can be used for food, or have the clip so can be used as a pit probe too.
They are built with SLE Special Limits of Error wire which is 2x as accurate as the standard limits of error wire normally used.

Since everything is hand made, I can custom make an item to whatever length you need, just let me know.

Keep on grillin!
Attachments
s-l1600[1].jpg
s-l1600[1].jpg
Cdaly2
Pilgrim
Posts: 1
Joined: Wed Mar 15, 2017 12:47 pm
Contact:

Re: BBQ Guru Meat + Pit Probe Upgrades, Homemade, Custom!

Postby Cdaly2 » Wed Mar 15, 2017 1:13 pm

I need a replacement (or two)
IMG_0274.JPG
This is the old one. The connector is smaller than the newer GURU models.
pit probe for an old GURU PITMINDER E-TEMP. The BBQ GURU website has them for $35.
Spgrimes
Pilgrim
Posts: 1
Joined: Wed Mar 04, 2020 11:36 pm
Contact:

Re: BBQ Guru Meat + Pit Probe Upgrades, Homemade, Custom!

Postby Spgrimes » Thu Apr 09, 2020 7:24 am

bbqguruprobe wrote:Hey all,

Just wanted to let you know I'm selling low cost HOMEMADE replacement meat / pit probes for the BBQ Guru controllers / smokers.
I got tired of paying nearly $25 for replacement parts and didn't like the way they were built, so I bought some materials and started making my own.
Everyone that used them at my local shows liked them and suggested I make some extra to sell and spread the good fortune... so here is the information:

http://www.ebay.com/itm/291859370330 [short tube pit and meat probe]
http://www.ebay.com/itm/291867403814 [longer tube meat and pit probe]

I'm also working on a version that has a bent tube for easier insertion, or some sort of handle.... it's hard to source good materials though....

They utilize an easy to clean FEP jacketed cable instead of that woven steel.
The are pointed so can be used for food, or have the clip so can be used as a pit probe too.
They are built with SLE Special Limits of Error wire which is 2x as accurate as the standard limits of error wire normally used.

Since everything is hand made, I can custom make an item to whatever length you need, just let me know.

Keep on grillin!


Do you still make these?

Return to “Pit Accessories, Stokers, Thermometers and Knives”

Who is online

Users browsing this forum: No registered users and 13 guests