Where Can I Buy This Part for my grill?

Any type of high heat grill.

Moderator: TBBQF Deputies

shmay7
Pilgrim
Posts: 7
Joined: Mon Jul 09, 2018 1:49 pm
Contact:

Where Can I Buy This Part for my grill?

Postby shmay7 » Mon Jul 09, 2018 2:05 pm

Or do you know how I can repair it?

A valve control on my Amana grill was forced to the clockwise until it stripped (not the knob - the knob is fine). The valve stays open and the dial just turns around with no effect. I am assuming that this is a relatively simple repair and/or that this part is somewhat standard and I can pick it up somewhere - I guess that would be my preferred method, to replace the part.

The parts says:
65mhar
A200-0
1/2 PSI

Thank you in advance
Attachments
IMG_20180709_122147.jpg
User avatar
OldUsedParts
Deputy
Posts: 11224
Joined: Sun May 15, 2011 7:09 pm
Location: Montgomery, Texas
Contact:

Re: Where Can I Buy This Part for my grill?

Postby OldUsedParts » Mon Jul 09, 2018 2:14 pm

I googled that number and found this https://www.partselect.com/CombinedSear ... px?ID=a200
OUP

" Country by choice, Texan by the Grace of God "
shmay7
Pilgrim
Posts: 7
Joined: Mon Jul 09, 2018 1:49 pm
Contact:

Re: Where Can I Buy This Part for my grill?

Postby shmay7 » Mon Jul 09, 2018 10:49 pm

OldUsedParts wrote:I googled that number and found this https://www.partselect.com/CombinedSear ... px?ID=a200

Thanks for the effort!
It looks like my aging eyesight failed me and I should have been looking for 65mbar, not 65mhar. A quick search seems that that's getting me much closer.
shmay7
Pilgrim
Posts: 7
Joined: Mon Jul 09, 2018 1:49 pm
Contact:

Re: Where Can I Buy This Part for my grill?

Postby shmay7 » Mon Jul 09, 2018 11:27 pm

I actually located this, which is for the side-burner for my unit and includes a part very similar to what I need - with a slight difference on the end of the nozzle. I've got to determine if that will make a difference or not. I actually have the side-burner that I don't use, so if I cannot get the actual part, I'll look into cannibalizing it.

https://www.appliancefactoryparts.com/s ... rt/494382/
User avatar
rms827
Bandolero
Posts: 519
Joined: Fri Apr 28, 2017 4:45 am
Location: People's Republic of California
Contact:

Re: Where Can I Buy This Part for my grill?

Postby rms827 » Tue Jul 10, 2018 1:59 am

Ouch... $103 for a valve is pretty steep. That MAY be something you could just replace with a plain old gas shut off valve from a hardware store, perhaps with an adapter to make it fit, if needed.

Maybe somebody who is better at scratch building and those kind of improvised repairs can give you a better idea if my idea is feasible.
Rec Tec 680
Weber 22" Premium Kettle Grill in Green

"Nobody Beats Me in the Kitchen" - Casey Ryback (Steven Seagal - Under Siege 2)
Life's Too Short for Bad BBQ.
shmay7
Pilgrim
Posts: 7
Joined: Mon Jul 09, 2018 1:49 pm
Contact:

Re: Where Can I Buy This Part for my grill?

Postby shmay7 » Tue Jul 10, 2018 6:58 pm

rms827 wrote:Ouch... $103 for a valve is pretty steep. That MAY be something you could just replace with a plain old gas shut off valve from a hardware store, perhaps with an adapter to make it fit, if needed.

Maybe somebody who is better at scratch building and those kind of improvised repairs can give you a better idea if my idea is feasible.

Yeah, that's what I thought/was hoping.

I'll get it figured at some point, but thought I'd check and see if someone could make it easier for me.
User avatar
Papa Tom
Deputy
Posts: 6196
Joined: Sat Jun 30, 2007 9:40 am
Location: Oak Point, TX
Contact:

Re: Where Can I Buy This Part for my grill?

Postby Papa Tom » Tue Jul 10, 2018 9:41 pm

Maybe this? You never indicated your model # it appears that Amana and Brinkman have a lot of common parts.

https://www.thebbqdepot.com/brass-clamp ... d0e164bfee
tarde venientibus ossa....
User avatar
rms827
Bandolero
Posts: 519
Joined: Fri Apr 28, 2017 4:45 am
Location: People's Republic of California
Contact:

Re: Where Can I Buy This Part for my grill?

Postby rms827 » Tue Jul 10, 2018 9:56 pm

Awesome find, Papa Tom. :salut:

Looks really close, and it's solid brass (or appears so) so it should be decent quality. Even if not, it's 1/3 the price.
Rec Tec 680
Weber 22" Premium Kettle Grill in Green

"Nobody Beats Me in the Kitchen" - Casey Ryback (Steven Seagal - Under Siege 2)
Life's Too Short for Bad BBQ.
shmay7
Pilgrim
Posts: 7
Joined: Mon Jul 09, 2018 1:49 pm
Contact:

Re: Where Can I Buy This Part for my grill?

Postby shmay7 » Wed Jul 11, 2018 2:24 pm

Papa Tom wrote:Maybe this? You never indicated your model # it appears that Amana and Brinkman have a lot of common parts.

https://www.thebbqdepot.com/brass-clamp ... d0e164bfee

Great! Thanks!

BTW, it's the Amana AM26LP.
shmay7
Pilgrim
Posts: 7
Joined: Mon Jul 09, 2018 1:49 pm
Contact:

Re: Where Can I Buy This Part for my grill?

Postby shmay7 » Wed Jul 11, 2018 2:46 pm

I haven't checked the fitting but does anyone know offhand if the shape of the end is a factor for these?
Attachments
Brinkman Part.jpg
SideBurner part.jpg
IMG_20180709_122147.jpg
shmay7
Pilgrim
Posts: 7
Joined: Mon Jul 09, 2018 1:49 pm
Contact:

Re: Where Can I Buy This Part for my grill?

Postby shmay7 » Wed Jul 11, 2018 3:16 pm

OK, it looks like it fits a bit loosely so my concern for back-flow must be unfounded.
Attachments
IMG_20180711_135508.jpg
IMG_20180711_135523.jpg
kendrick69
Pilgrim
Posts: 1
Joined: Mon Jul 16, 2018 5:09 pm
Contact:

Re: Where Can I Buy This Part for my grill?

Postby kendrick69 » Mon Jul 16, 2018 5:28 pm

Actually, when my old garden grill was broken a couple of years ago, I found a old, non-working grill online and bought it for a cheap price. I took a couple of parts that I needed and fixed my grill. Maybe you can do the same thing by looking on eBay or other marketplaces.

Return to “Charcoal Grills, Gas Grills and Disc Cookers”

Who is online

Users browsing this forum: No registered users and 1 guest