Welder fabricator building first smoker many questions
Moderator: TBBQF Deputies
-
- Wrangler
- Posts: 51
- Joined: Wed Jul 04, 2018 9:58 am
- Contact:
Re: Welder fabricator building first smoker many questions
Awesome thanks for the input . Yes having a big shop and a big fork lift is a bonus for sure busted my tail to get here finally buidling something for my self . Always super busy at my shop which is a good thing . Weld a lot and usually love it lol love building cool crazy things from metal for my customers .also get a lot of thumbs up from my customers when they come in and it gets a lot of looks and questions from new customers that come in its a good show piece to have on site . I'm also in a pretty popular and busy industrial park once I get it done I will have some cooks on it at my shop and I bet people will be stopping for some grub lol
- spacetrucker
- Chuck Wagon
- Posts: 3466
- Joined: Sun Jun 02, 2013 4:36 pm
- Location: Round Rock Texas
- Contact:
Re: Welder fabricator building first smoker many questions
Fabkid33 wrote:Awesome thanks for the input . Yes having a big shop and a big fork lift is a bonus for sure busted my tail to get here finally buidling something for my self . Always super busy at my shop which is a good thing . Weld a lot and usually love it lol love building cool crazy things from metal for my customers .also get a lot of thumbs up from my customers when they come in and it gets a lot of looks and questions from new customers that come in its a good show piece to have on site . I'm also in a pretty popular and busy industrial park once I get it done I will have some cooks on it at my shop and I bet people will be stopping for some grub lol
some info for you to ponder for your shop.... once or twice a month we would have a "coverdish" lunch, the shop bought the meat, and different guys or gals would cook, we always "put the word out to our customers" so on bbq day the customers just showed up and ate with us. We had a great time doing that and the customers became better customers if you catch my drift... once you have your project done, that just might be a business advertisement you want to contemplate, the meat is tax deductible
![Idea :idea:](./images/smilies/icon_idea.gif)
Don't count every day, Make every day Count
Good Cue to ya..
Vernon
FEC-100
Webber kettle 22"
Webber genesis
Blackstone pizza oven
Good Cue to ya..
Vernon
FEC-100
Webber kettle 22"
Webber genesis
Blackstone pizza oven
-
- Wrangler
- Posts: 51
- Joined: Wed Jul 04, 2018 9:58 am
- Contact:
Re: Welder fabricator building first smoker many questions
Been super busy in my shop. worked in about 6 hours on my smoker got the top and bottom caps on vertical chamber, angled the bottom cap for s drain. cut in the vertical chamber door !!!!
-
- Pilgrim
- Posts: 5
- Joined: Wed Mar 18, 2020 1:10 pm
- Contact:
Re: Welder fabricator building first smoker many questions
That thing is nuts! Can't wait to see what it produces.
-
- Wrangler
- Posts: 51
- Joined: Wed Jul 04, 2018 9:58 am
- Contact:
Re: Welder fabricator building first smoker many questions
Finally got it sitting on it's own weight and on a custom stand
-
- Wrangler
- Posts: 51
- Joined: Wed Jul 04, 2018 9:58 am
- Contact:
Re: Welder fabricator building first smoker many questions
Had some more progress today . Got my damper door in and added my drains
- Attachments
Last edited by Fabkid33 on Fri Mar 27, 2020 9:30 pm, edited 3 times in total.
-
- Wrangler
- Posts: 51
- Joined: Wed Jul 04, 2018 9:58 am
- Contact:
Re: Welder fabricator building first smoker many questions
More progress
Firebox damper all done ,trimmed firebox door with flat strap
Firebox damper all done ,trimmed firebox door with flat strap
- OldUsedParts
- Deputy
- Posts: 21615
- Joined: Sun May 15, 2011 7:09 pm
- Location: Montgomery, Texas
- Contact:
Re: Welder fabricator building first smoker many questions
Beautiful Work, Sir
![Salut :salut:](./images/smilies/icon_salut.gif)
![Wave :wav:](./images/smilies/wav.gif)
![Salut :salut:](./images/smilies/icon_salut.gif)
I am determined to sustain myself as long as possible & die like a soldier who never forgets what is due to his own honor & that of his country—Victory or Death. William Barret Travis - Lt. Col. comdt "The Alamo"
- k.a.m.
- Chuck Wagon
- Posts: 3746
- Joined: Mon Jun 25, 2012 6:38 pm
- Contact:
Re: Welder fabricator building first smoker many questions
Mighty fine work brother.
![Salut :salut:](./images/smilies/icon_salut.gif)
![Salut :salut:](./images/smilies/icon_salut.gif)
![Salut :salut:](./images/smilies/icon_salut.gif)
![Salut :salut:](./images/smilies/icon_salut.gif)
- hogaboomer
- Rustler
- Posts: 174
- Joined: Tue Jun 11, 2019 9:42 pm
- Location: Groves, TX.
- Contact:
Re: Welder fabricator building first smoker many questions
Does the firebox need to be all that sealable? I leave the door on mine wide open all the time unless it just gets super hot. The smoke stack damper does a great job of keeping the heat regulated.
It is a nice job of work, though.
It is a nice job of work, though.
-
- Wrangler
- Posts: 51
- Joined: Wed Jul 04, 2018 9:58 am
- Contact:
Re: Welder fabricator building first smoker many questions
I see some people opening the doors but also see lots of people with adjustable dampers. Maybe k.a.m has so info on it I'm a newbie with this smoker and smoking meet In general
- k.a.m.
- Chuck Wagon
- Posts: 3746
- Joined: Mon Jun 25, 2012 6:38 pm
- Contact:
Re: Welder fabricator building first smoker many questions
Typically offsets are controlled by the intakes on the firebox with the exhaust wide open. Jambos are upward draft cookers that perform better while using the exhaust for temp control because it stalls the draft in the cooker but the door on the firebox is closed and intakes are set.
Most offsets I see with the door open usually have poor draft so this is needed to help keep the coal base going but some cookers perform well this way. My advice is if it works for you then do it.![Very Happy :D](./images/smilies/icon_biggrin.gif)
Most offsets I see with the door open usually have poor draft so this is needed to help keep the coal base going but some cookers perform well this way. My advice is if it works for you then do it.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
-
- Wrangler
- Posts: 51
- Joined: Wed Jul 04, 2018 9:58 am
- Contact:
Re: Welder fabricator building first smoker many questions
I have a question hopefully k.a.m or someone else can answer it I want to start putting the flat strap around my doors and I need to take the spring out of them can it be done with a 10 ton bottle Jack and heavy duty chain ?
- k.a.m.
- Chuck Wagon
- Posts: 3746
- Joined: Mon Jun 25, 2012 6:38 pm
- Contact:
Re: Welder fabricator building first smoker many questions
Fabkid33 wrote:I have a question hopefully k.a.m or someone else can answer it I want to start putting the flat strap around my doors and I need to take the spring out of them can it be done with a 10 ton bottle Jack and heavy duty chain ?
Yes you can.
What I do is see how much spring there is and note it. Then measure from the top of the door to the bottom on the end and note that measurement. When you start pumping the jack the measurement on the end will start to decrease, once you have gone a bit past your desired finish put the strap on the end. When welding the end straps weld from the top to center and bottom to center to decrease the chance of the door pulling out more.
I hope this helps.
-
- Wrangler
- Posts: 51
- Joined: Wed Jul 04, 2018 9:58 am
- Contact:
Re: Welder fabricator building first smoker many questions
Got a few small updates
-removable 1/4 plate griddle for easy cleaning with 1 1/2 lip all the way around want to make a removable grill grate in the future
- rolled some flat strap for the outer seal of my vertical chamber had to flex the door a whole lot more then I thought with a bottle Jack and chain took me 3 pieces of flat strap to get it right .
-got a 8 inch piece of pipe for my vertical chamber stack and was wondering where is the best place to mount it in the top, should I center it should i offset it and should i flush mount it to the chamber or let it stick through a little ?
Also has anyone seasoned a piece of hot rolled plate and used it for cooking like I'm trying to do inside my firebox ?
-removable 1/4 plate griddle for easy cleaning with 1 1/2 lip all the way around want to make a removable grill grate in the future
- rolled some flat strap for the outer seal of my vertical chamber had to flex the door a whole lot more then I thought with a bottle Jack and chain took me 3 pieces of flat strap to get it right .
-got a 8 inch piece of pipe for my vertical chamber stack and was wondering where is the best place to mount it in the top, should I center it should i offset it and should i flush mount it to the chamber or let it stick through a little ?
Also has anyone seasoned a piece of hot rolled plate and used it for cooking like I'm trying to do inside my firebox ?
Return to “Custom Built Pits, Build Your Own Pit & Pit Modifications”
Who is online
Users browsing this forum: No registered users and 72 guests