In-ground pit smoker question
Moderator: TBBQF Deputies
-
culito
- Pilgrim
- Posts: 4
- Joined: Wed Apr 29, 2020 10:15 am
- Contact:
In-ground pit smoker question
I have a in ground fire pit made from three pieces of 30" pipe cut in half and welded together (3 leaf clover)about 3-4 feet in length (need to dig out). They are sunk in the ground and cemented in the patio with 6" stem wall around the pipe and I have a 1/4 inch steel lid that covers pit and almost all the cement stem wall. My question is how do I turn this into a smoker? Do I use it like a UDS or a small offset or ???? by putting intake and exhaust in lid.Any input is welcome. thanks!
-
OldUsedParts
- Deputy
- Posts: 21606
- Joined: Sun May 15, 2011 7:09 pm
- Location: Montgomery, Texas
- Contact:
Re: In-ground pit smoker question
Howdy and Welcome to the Forum 
If you could post up some pics of what you're dealing with, I'm sure it would be a big help.
If you could post up some pics of what you're dealing with, I'm sure it would be a big help.
I am determined to sustain myself as long as possible & die like a soldier who never forgets what is due to his own honor & that of his country—Victory or Death. William Barret Travis - Lt. Col. comdt "The Alamo"
-
culito
- Pilgrim
- Posts: 4
- Joined: Wed Apr 29, 2020 10:15 am
- Contact:
Re: In-ground pit smoker question
How do you post pictures?
-
culito
- Pilgrim
- Posts: 4
- Joined: Wed Apr 29, 2020 10:15 am
- Contact:
-
culito
- Pilgrim
- Posts: 4
- Joined: Wed Apr 29, 2020 10:15 am
- Contact:
-
Papa Tom
- Deputy
- Posts: 6774
- Joined: Sat Jun 30, 2007 9:40 am
- Location: Oak Point, TX
- Contact:
Re: In-ground pit smoker question
Cool fire pit.......
I think I,d keep it and build/buy a smoker....
I think I,d keep it and build/buy a smoker....
tarde venientibus ossa....
Return to “Custom Built Pits, Build Your Own Pit & Pit Modifications”
Who is online
Users browsing this forum: No registered users and 42 guests