Weber SmokeFire EX6
Moderator: TBBQF Deputies
- TX1911
- Deputy
- Posts: 2040
- Joined: Wed Sep 15, 2010 10:30 am
- Location: Richmond, Texas
- Contact:
Weber SmokeFire EX6
Well, it finally arrived! I sold the Camp Chef to a neighbor and pre-ordered the Weber SmokeFire EX6 back in January. It arrived yesterday, and, with a little help, got it all assembled!
Assembly was much easier than I expected. Everything was clearly labeled, and the only tool I needed that was not included was a Philips head screwdriver.
Started it up this morning and did the initial burn off, per the instructions. 600 degrees for 30-40 minutes.
Initial impressions:
- This thing is large. I am curious to see how the temperature holds across the cooking surface.
- Quick start up. Given that it was the first time running it and the auger needed to charge, it started quickly and got to temp surprisingly fast, roughly 15 minutes.
- The last picture above is while it is running. No noticeable smoke leakage.
Too early conclusion: It appears to be very well made, with a lot of attention to detail and thought put in. The motor and fan seem to be very strong. The only two complaints that I have are (1) the location of the hopper makes it difficult to fill if, like me, it is close to a wall; and (2) due to the ash collection system, when it was at 600, I did notice some sparks falling out of the bottom, so be very careful if you're interested in one and intend to have it on a wooden deck or something.
I have a couple pork tenderloins marinating in Sucklebuster's Pork Marinade right now so I can test out the cooking. I'll post back my results!
Assembly was much easier than I expected. Everything was clearly labeled, and the only tool I needed that was not included was a Philips head screwdriver.
Started it up this morning and did the initial burn off, per the instructions. 600 degrees for 30-40 minutes.
Initial impressions:
- This thing is large. I am curious to see how the temperature holds across the cooking surface.
- Quick start up. Given that it was the first time running it and the auger needed to charge, it started quickly and got to temp surprisingly fast, roughly 15 minutes.
- The last picture above is while it is running. No noticeable smoke leakage.
Too early conclusion: It appears to be very well made, with a lot of attention to detail and thought put in. The motor and fan seem to be very strong. The only two complaints that I have are (1) the location of the hopper makes it difficult to fill if, like me, it is close to a wall; and (2) due to the ash collection system, when it was at 600, I did notice some sparks falling out of the bottom, so be very careful if you're interested in one and intend to have it on a wooden deck or something.
I have a couple pork tenderloins marinating in Sucklebuster's Pork Marinade right now so I can test out the cooking. I'll post back my results!
Custom 24x48 offset trailer pit
Weber Smokefire EX6
Vision B Series kamado
Race Crew Drum
Weber Smokefire EX6
Vision B Series kamado
Race Crew Drum
- Rambo
- Deputy
- Posts: 8475
- Joined: Mon Apr 02, 2012 10:39 pm
- Location: Lufkin, TEXAS
- Contact:
- txsmkmstr
- Bandolero
- Posts: 628
- Joined: Tue Jun 14, 2011 7:13 pm
- Location: TX
- Contact:
Re: Weber SmokeFire EX6
Based on my internet readings you'll want to watch out for two things.....
Hopper not feeding pellets (tunnelling?)
Grease accumulation during long cooks (fire danger)
I won't get into the validity of these items but there has been a lot of chatter over the last several weeks. Also, some pictures of very good looking food so please share at your earliest convenience.
Congrats on your purchase.
Hopper not feeding pellets (tunnelling?)
Grease accumulation during long cooks (fire danger)
I won't get into the validity of these items but there has been a lot of chatter over the last several weeks. Also, some pictures of very good looking food so please share at your earliest convenience.
Congrats on your purchase.
Custom LSG 24x40 - 36" Blackstone - (others - R & O FatGirl, ETSC RK-250, Tejas 1628 - all sold)
- OldUsedParts
- Deputy
- Posts: 21615
- Joined: Sun May 15, 2011 7:09 pm
- Location: Montgomery, Texas
- Contact:
Re: Weber SmokeFire EX6
Congrats on the Score, Counselor, looking forward to your Projects and Pics.
I am determined to sustain myself as long as possible & die like a soldier who never forgets what is due to his own honor & that of his country—Victory or Death. William Barret Travis - Lt. Col. comdt "The Alamo"
- TX1911
- Deputy
- Posts: 2040
- Joined: Wed Sep 15, 2010 10:30 am
- Location: Richmond, Texas
- Contact:
Re: Weber SmokeFire EX6
Well, here goes.
Initially, I read the reviews that have been posted about it. Unfortunately, I pre-ordered this thing so the reviews weren't available.
So, to the cook.
First glance, this thing puts out quite a bit of smoke. The flavor profile on the pork loin was excellent.
Now, moving to the critique of the unit itself.
There is ash everywhere. This thing is advertised as collecting 80% of the ash and grease in the disposable pan. So far, I would be the ash in the disposable pan at about 5%. The metal tray the ash is housed in collects about 50%. The rest is strewn about the grill, both inside and out. There was no grease in the pan. There was grease in the bottom of the cooker. Granted, pork tenderloins don't produce grease like a brisket, but the fact that there were no drippings in the pan tells me that it's all pooling at the bottom and, as others have noted, will eventually result in a grease fire.
I put 2 extra thermometers in to determine the heat distribution in the pit. As I am standing and looking at the pit, the center was set at 260. The left third was 241, and the right third was 209. That's a pretty big spread if you ask me.
I checked the hopper to see if the tunneling issue was present, as the reviews stated. It very much was. There's either not enough slope on the hopper to allow the pellets to freely travel, or the material creates too much friction.
I really, really wanted to like this grill. I like the size, I like the appearance, and I like the flavor of the food. Unfortunately, the negatives of the unit are too much for those to overcome. Especially the potential for a grease fire on long cooks.
So I've started the return process and am waiting to hear back from Weber.
If you listen to their promotional material, they put thousands of pounds of pellets through these during development and had no issues. That's either completely false, or something happened between the prototypes they were using and the production models they put out. Quite honestly, I expected much more from Weber.
Once we get the return rolling, I'll be calling Rec-Tec.
Initially, I read the reviews that have been posted about it. Unfortunately, I pre-ordered this thing so the reviews weren't available.
So, to the cook.
First glance, this thing puts out quite a bit of smoke. The flavor profile on the pork loin was excellent.
Now, moving to the critique of the unit itself.
There is ash everywhere. This thing is advertised as collecting 80% of the ash and grease in the disposable pan. So far, I would be the ash in the disposable pan at about 5%. The metal tray the ash is housed in collects about 50%. The rest is strewn about the grill, both inside and out. There was no grease in the pan. There was grease in the bottom of the cooker. Granted, pork tenderloins don't produce grease like a brisket, but the fact that there were no drippings in the pan tells me that it's all pooling at the bottom and, as others have noted, will eventually result in a grease fire.
I put 2 extra thermometers in to determine the heat distribution in the pit. As I am standing and looking at the pit, the center was set at 260. The left third was 241, and the right third was 209. That's a pretty big spread if you ask me.
I checked the hopper to see if the tunneling issue was present, as the reviews stated. It very much was. There's either not enough slope on the hopper to allow the pellets to freely travel, or the material creates too much friction.
I really, really wanted to like this grill. I like the size, I like the appearance, and I like the flavor of the food. Unfortunately, the negatives of the unit are too much for those to overcome. Especially the potential for a grease fire on long cooks.
So I've started the return process and am waiting to hear back from Weber.
If you listen to their promotional material, they put thousands of pounds of pellets through these during development and had no issues. That's either completely false, or something happened between the prototypes they were using and the production models they put out. Quite honestly, I expected much more from Weber.
Once we get the return rolling, I'll be calling Rec-Tec.
Custom 24x48 offset trailer pit
Weber Smokefire EX6
Vision B Series kamado
Race Crew Drum
Weber Smokefire EX6
Vision B Series kamado
Race Crew Drum
- OldUsedParts
- Deputy
- Posts: 21615
- Joined: Sun May 15, 2011 7:09 pm
- Location: Montgomery, Texas
- Contact:
Re: Weber SmokeFire EX6
OUCH - - - hopefully your experience will help/MAKE them GTST - - - Good Luck with your Return Process
I am determined to sustain myself as long as possible & die like a soldier who never forgets what is due to his own honor & that of his country—Victory or Death. William Barret Travis - Lt. Col. comdt "The Alamo"
- GRailsback
- Chuck Wagon
- Posts: 3646
- Joined: Tue Nov 19, 2013 4:44 pm
- Location: Cypress TX.
- Contact:
Re: Weber SmokeFire EX6
Matt, hopefully the return process will not be to painful. I can hear and visualize your disappointment.
- TX1911
- Deputy
- Posts: 2040
- Joined: Wed Sep 15, 2010 10:30 am
- Location: Richmond, Texas
- Contact:
Re: Weber SmokeFire EX6
So, while waiting for return information, i spoke with their customer service department. They are sending me a piece to fix the pellet feeding issue. They asked me to give it a shot on a long cook. Since its Weber, I decided to give them a chamce to fix it. I told them I would wait to return it and try the part if I could still return it afterwards. They said I could, so i will give it one more shot, and this time, its going to be a pork shoulder. See about these grease fires.
Will update once the part comes in.
Will update once the part comes in.
Custom 24x48 offset trailer pit
Weber Smokefire EX6
Vision B Series kamado
Race Crew Drum
Weber Smokefire EX6
Vision B Series kamado
Race Crew Drum
- GRailsback
- Chuck Wagon
- Posts: 3646
- Joined: Tue Nov 19, 2013 4:44 pm
- Location: Cypress TX.
- Contact:
Re: Weber SmokeFire EX6
Matt, I am hopefull that the add on piece works for you, and doesn't pool grease as has been reported. I am also hopefull that they are not pleading with you to keep it because they are already inundated with returns. Hopefully they will do right either way.
If not, we know a good attorney here on the forum.
If not, we know a good attorney here on the forum.
- spacetrucker
- Chuck Wagon
- Posts: 3466
- Joined: Sun Jun 02, 2013 4:36 pm
- Location: Round Rock Texas
- Contact:
Re: Weber SmokeFire EX6
Wow thanks for review; The Webber equipment I have has performed perfectly, I am sorry to see that this has its problems; The folks at work have been talking to me about it saying how great they have heard it is; I have not read any reviews except yours which does not look favorable; I will watch and see what you follow up with..
Thanks
Thanks
Don't count every day, Make every day Count
Good Cue to ya..
Vernon
FEC-100
Webber kettle 22"
Webber genesis
Blackstone pizza oven
Good Cue to ya..
Vernon
FEC-100
Webber kettle 22"
Webber genesis
Blackstone pizza oven
- TX1911
- Deputy
- Posts: 2040
- Joined: Wed Sep 15, 2010 10:30 am
- Location: Richmond, Texas
- Contact:
Re: Weber SmokeFire EX6
So, I have to give some (not all, but some) kudos to Weber's customer service. When I got off the phone, I was told the part would take 5-7 days to arrive. Turns out, they over-nighted it and sent a bag of pellets too. I'll install it this evening and see how it runs without any food on it.
The only reason that I give them partial kudos, is because their solution to the grease problem is to put a pan between the grill grate and the flavorizer bars. To me, that's a half-hearted fix. They even termed it "like you would on any other grill." My response was "the only grill I put a pan under the grate is my kamado". Never had to do it on my Camp Chef.
Again, I'll give them a shot on a long cook, probably this coming week unless I can snag a pork shoulder this weekend for a test cook.
More to come, I'm sure!
The only reason that I give them partial kudos, is because their solution to the grease problem is to put a pan between the grill grate and the flavorizer bars. To me, that's a half-hearted fix. They even termed it "like you would on any other grill." My response was "the only grill I put a pan under the grate is my kamado". Never had to do it on my Camp Chef.
Again, I'll give them a shot on a long cook, probably this coming week unless I can snag a pork shoulder this weekend for a test cook.
More to come, I'm sure!
Custom 24x48 offset trailer pit
Weber Smokefire EX6
Vision B Series kamado
Race Crew Drum
Weber Smokefire EX6
Vision B Series kamado
Race Crew Drum
- spacetrucker
- Chuck Wagon
- Posts: 3466
- Joined: Sun Jun 02, 2013 4:36 pm
- Location: Round Rock Texas
- Contact:
Re: Weber SmokeFire EX6
in response to the pan... my Traeger which is years old and my FEC in my avatar both have pans to catch drippings and drain them to a bucket or hotel catch pan. You may be the one to teach Webber a few things...
Don't count every day, Make every day Count
Good Cue to ya..
Vernon
FEC-100
Webber kettle 22"
Webber genesis
Blackstone pizza oven
Good Cue to ya..
Vernon
FEC-100
Webber kettle 22"
Webber genesis
Blackstone pizza oven
- TX1911
- Deputy
- Posts: 2040
- Joined: Wed Sep 15, 2010 10:30 am
- Location: Richmond, Texas
- Contact:
Re: Weber SmokeFire EX6
Got the hopper improvement piece installed last night. Running a 3 hour test this morning to see if it helps. No food on this run.
Custom 24x48 offset trailer pit
Weber Smokefire EX6
Vision B Series kamado
Race Crew Drum
Weber Smokefire EX6
Vision B Series kamado
Race Crew Drum
- TX1911
- Deputy
- Posts: 2040
- Joined: Wed Sep 15, 2010 10:30 am
- Location: Richmond, Texas
- Contact:
Re: Weber SmokeFire EX6
A couple observations 45 minutes into the test. 1. The software update seems to have worked in reducing the fan speed. Nowhere near the volume of ash being thrown about. 2. Likely due to the reduced fan speed, pellet consumption has dropped dramatically. No tunneling yet, but it's still early.
Custom 24x48 offset trailer pit
Weber Smokefire EX6
Vision B Series kamado
Race Crew Drum
Weber Smokefire EX6
Vision B Series kamado
Race Crew Drum
- daBertl
- Bandolero
- Posts: 934
- Joined: Sat Mar 17, 2018 12:03 pm
- Contact:
Re: Weber SmokeFire EX6
I´m observing your report quite interested because I think about a purchase too.
Extra Bavaria non est vita, et si est vita, non est ita.
Return to “Pellet Cookers and Smokers”
Who is online
Users browsing this forum: No registered users and 64 guests